LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (Engine Control System) >> Metering Oil Pump Driver Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Metering Oil Pump Driver Removal/Installation

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
  2. Disconnect the negative battery cable.
  3. Disconnect the metering oil pump driver connector.
  4. Remove the metering oil pump driver.
  5. Install in the reverse order of removal.
Fig 1: Metering Oil Pump Driver Screws With Torque Specifications
G05981161Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals