LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Body & Frame >> Glass/Windows/Mirrors >> Power Window Motor Inspection >> Rear
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Window Motor Inspection: Rear

  1. Disconnect the negative battery cable.
  2. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION ).
  3. Disconnect the power window motor connector.
  4. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.
    • If the power window motor does not operate as indicated in the chart, replace the power window motor.
    Operation Terminal
    E F
    Open Ground B+
    Close B+ Ground
    Fig 1: Connecting Ground To Power Window Motor Terminals E And F (Rear)
    G06731789Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals