LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 617 (Dynamic Stability Control) >> DSC HU/Cm Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DSC HU/Cm Inspection: Notes

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
  2. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF, L5] .) (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] .)
  3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.
scientia non olet · About LEMON Manuals