LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Security System And Locks System) >> Card Key Id Code Registration [With Advanced Keyless System] >> Using M-MDS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using M-MDS

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully lower the driver-side door glass.
  2. Connect the M-MDS to DLC-2.
  3. Set the M-MDS outside the vehicle with its cable passing through the door glass opening.
    CAUTION:
    • Cover the vehicle body with a clean rag so as not to damage the vehicle body with the cable.
    Fig 1: Identifying DLC-2 Connector
    G05986041Courtesy of MAZDA MOTORS CORP.
  4. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Body".
      2. Select "Security".
      3. Select "PATS Functions".
    • When using the PDS (Pocket PC)
      1. Select "All Tests and Calibrations".
      2. Select "PATS Functions".
  5. Then, select an item from the screen menu.
    1. Select the "Program Additional card key"
  6. Perform the security access according to the directions on the M-MDS screen.
scientia non olet · About LEMON Manuals