LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 i SV, 2.0 F >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System [L3 With TC]) >> Neutral Switch Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Neutral Switch Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] ).
  2. Disconnect the negative battery cable.
  3. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
  4. Inspect for continuity between the neutral switch terminals using an ohmmeter.
    SPECIFICATION

    Measured condition Continuity
    Rod pushed Continuity detected
    Except above No continuity
    Fig 1: Identifying Neutral Switch Connector Terminals
    G07868460Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals