LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 i Sport, 2.0 F, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [LF, L5] >> Clutch Pedal Position (CPP) Switch Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Clutch Pedal Position (CPP) Switch Inspection

  1. Verify that the CPP switch is installed properly.
  2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] ).
  3. Disconnect the negative battery cable.
  4. Disconnect the CPP switch connector. (See CLUTCH PEDAL REMOVAL/INSTALLATION ).
  5. Inspect for continuity between the CPP switch terminals using an ohmmeter.
    • If not as specified, replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION ).
      SPECIFICATION

      Measured condition Clutch pedal position Continuity
      Rod pushed Clutch pedal released Continuity detected
      Except above Clutch pedal depressed No continuity
      Fig 1: Identifying CPP Switch Connector Terminals
      G07868514Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals