Brake Rotor/Disc

Minimum front disc plate thickness 23 mm {0.91 in}
Minimum front disc plate thickness after machining using a brake lathe on-vehicle 23.8 mm {0.937 in}
Front disc plate runout limit 0.05 mm {0.002 in}


Minimum rear disc plate thickness 8 mm {0.3 in}
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle 8.8 mm {0.35 in}
Rear disc plate runout limit 0.14 mm {0.0055 in}

If the thickness is not within the specification, replace the disc plate.