| B10D9:87 |
P1260:00 |
No detected communication with coil antenna |
(See
SECURITY LIGHT: 11, DTC: B10D9:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D5:13 |
P1260:00 |
- Coil antenna malfunction
- PCM or keyless control module determined a malfunction in coil antenna even though it is normal
|
(See
SECURITY LIGHT: 12, DTC: B10D5:13/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:05 |
P1260:00 |
Key ID number program error |
(See
SECURITY LIGHT: 13, DTC: B10D7:05/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:94 |
P1260:00 |
Key ID number data cannot be read |
(See
SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:81 |
P1260:00 |
Keyless control module cannot read key ID number data normally |
(See
SECURITY LIGHT: 14, DTC: B10D7:81/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:51 |
P1260:00 |
Keyless control module has detected unprogrammed key ID number |
(See
SECURITY LIGHT: 15, DTC: B10D7:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| U0100:87 |
P1260:00 |
Communication error between keyless control module and PCM (no response/condition mismatch) |
(See
SECURITY LIGHT: 16, DTC: U0100:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D8:00 |
P1260:00 |
Only one key or no key has been programmed |
(See
SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10DA:51 |
P1260:00 |
Communication error between keyless control module and PCM (data transfer failure) |
(See
SECURITY LIGHT: 22, DTC: B10DA:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10DA:62 |
P1260:00 |
ID number data in keyless control module and PCM do not match |
(See
SECURITY LIGHT: 23, DTC: B10DA:62/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10E6:11 |
- |
Voltage less than the specification (2.2-6.5 V)
is detected for 0.5 s
while the coil antenna power supply circuit is active |
(See
SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:11/- [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10E6:12 |
Voltage higher than the specification (2.2-6.5 V)
is detected for 0.05 s
while the coil antenna power supply circuit is not active |
(See
SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:12/- [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| U0001:88 |
U0073:00 |
Module communication error (HS-CAN) |
| U0100:00 |
- |
Communication error with PCM |
| U3000:41 |
- |
Keyless control module internal malfunction |
(See
DTC U3000:41 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
.) |