LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 577 (Security System And Locks System) >> Request Switch Removal/Installation [With Advanced Keyless System] >> Trunk Lid
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trunk Lid

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION .)
  3. Detach the request switch from the rear bumper.
  4. Install in the reverse order of removal.
Fig 1: Identifying Request Switch, Connector And Rear Bumper
G04928916Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals