LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> RX-8 Sport, 1.3 2 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Quick Release Connector Removal/Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Quick Release Connector Removal/Installation: Removal

  1. Complete the "BEFORE SERVICE PRECAUTION". (See BEFORE SERVICE PRECAUTION .)
    CAUTION:
    • The quick release connector may be damaged if the release tab is bent excessively. Do not expand the release tab over the stopper.
    NOTE:
    • The fuel hose can be removed by pushing it to the pipe side to release the lock.
  2. Rotate the release tab on the quick release connector to the stopper position.
    Fig 1: Identifying Release Tab On Quick Release Connector
    G05981004Courtesy of MAZDA MOTORS CORP.
  3. Pull out the quick release connector straight from the port and disconnect it.
    Fig 2: Disconnecting Quick Release Connector
    G05981005Courtesy of MAZDA MOTORS CORP.
  4. Cover the disconnected quick release connector and port with vinyl sheeting or a similar material to prevent it from scratches or dirt.
Fig 3: Covering Disconnected Quick Release Connector And Port Using Vinyl Sheeting
G05981006Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals