LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Component Tests and General Diagnostics >> PCM Temperature Sensor Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

PCM Temperature Sensor Inspection




PCM TEMPERATURE SENSOR INSPECTION [13B-MSP]

NOTE:
- Before performing the following inspection, make sure to follow the troubleshooting flowchart. Initial Inspection and Diagnostic Overview

1. Connect the M-MDS to the DLC-2.






2. Turn the ignition switch to the ON position.

3. Select PCM_T on the M-MDS.

4. Verify that the PCM_T PID voltage is within the specification.

- If not as verified, replace the PCM. Service and Repair

PCM Temperature Sensor Output Voltage
- 1.2-2.6 V

scientia non olet · About LEMON Manuals