DTC P1384:00: Notes

DTC P1384:00	OCV circuit malfunction
DETECTION CONDITION	If any of the following conditions are met during the KOER self test: The PCM cannot control the actual valve timing at the target valve timing. The PCM cannot hold the valve timing. Diagnostic support note This is a continuous monitor (other). The MIL does not illuminate. FREEZE FRAME DATA (Mode 2)/Snapshot data is not available. The DTC is not stored in the PCM memory.
POSSIBLE CAUSE	Improper operation of variable valve timing control system CMP sensor malfunction OCV malfunction Variable valve timing actuator malfunction Hydraulic passages blockage and/or leakage Improper adjustment of valve timing PCM malfunction