Shift Control Module Disassembly

SHIFT CONTROL MODULE DISASSEMBLY

1. Disassemble the shift control module in the order shown in the figure.











Pin Removal Note






1. Secure the shift control module in a vise.






2. Mark the switch pin and interlock sleeve.

NOTE: The switch pin has a particular installation direction.






3. Remove the pin (switch pin) using a punch.






4. Move the shift lever to set the guide pin to the 5GR position of the guide plate.






5. Remove the pin (control lever component) using a punch.


Clip Removal Note






1. Move the guide pin to the position shown in the figure for the guide plate.
2. Push down the spring seat by hand.
3. Detach the clip.