On-Board System Readiness Tests Access Procedure

ON-BOARD DIAGNOSTIC TEST [MZR 2.0, MZR 2.5]

On-Board System Readiness Tests Access Procedure

1. Connect the M-MDS (IDS) to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
a. Select "Powertrain".

b. Select "OBD Test Modes".

c. Select "Mode 1 Powertrain Data".

d. Select "PCM".

3. Then, select the "***SUP" and "**EVAL" PIDs in the PID selection screen.

4. Monitor those PIDs and check it system monitor is completed.

NOTE:
- If the on-board system readiness tests are not completed the PCM stores DTC P1000.