LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 3 Mazdaspeed, 2.3L Eng VIN 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 458 (Dynamic Stability Control System) >> DSC HU/Cm Inspection >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/Cm Inspection: Notes

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the DSC HU/CM connector.
  2. Connect the negative battery cable.
  3. Attach the tester lead to the DSC HU/CM harness side connector, then inspect voltage, continuity or resistance according to the standard (reference value) on the table.
scientia non olet · About LEMON Manuals