LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 3 Mazdaspeed, 2.3L Eng VIN 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 562 (Dynamic Stability Control System) >> Dynamic Stability Control HU/Cm Removal/Installation >> Brake Pipe Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pipe Removal Note

WARNING: This page is about a different car, the 2013 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place an alignment mark on the brake pipe and DSC HU/CM.
    Fig 1: Identifying Alignment Mark On Brake Pipe And DSC HU/CM
    G08156072
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
scientia non olet · About LEMON Manuals