LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 3 Mazdaspeed, 2.3L Eng VIN 4 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Symptom Troubleshooting [Advanced Keyless Entry System And Push Button Start System] >> No.3 Push Button Start System Does Not Operate [Advanced Keyless Entry And Push Button Start System] >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

No.3 Push Button Start System Does Not Operate [Advanced Keyless Entry And Push Button Start System]: Notes

3 Push button start system does not operate
DESCRIPTION
  • Cannot switch to ACC or ignition to ON
  • Engine does not start
Possible Causes 
  • Advanced key battery malfunction (battery power depleted)
  • Advanced key malfunction
  • Keyless control module malfunction
  • Open or short circuit in keyless control module power supply
  • ENG+B fuse or ROOM fuse malfunction
  • Front keyless antenna malfunction
  • Open or short circuit in wiring harness between front keyless antenna and keyless control module
  • Open or short circuit in wiring harness between push button start switch and keyless control module
  • PCM malfunction
  • Engine starting system malfunction
  • Short to power supply in starter relay wiring harness
  • Steering lock unit malfunction
  • Open or short circuit in wiring harness between keyless control module and steering lock unit
  • Relay block (ACC relay, IG1 relay, IG2 relay) malfunction
  • Open or short circuit in wiring harness between relay block (ACC relay, IG1 relay, IG2 relay) and keyless control module
  • CAN system malfunction.
  • Effect of after-market electronic device installation