LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 3 Mazdaspeed, 2.3L Eng VIN 4 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Driver Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Side

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5] .) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the buckle switch terminals using a tester.
    Fig 1: Inspecting For Continuity Between Buckle Switch Terminals
    G08158290
    • If not as indicated in the table, replace the driver side front buckle.
    Fig 2: Driver Side Front Buckle Switch Terminals Continuity Chart
    G08158291
scientia non olet · About LEMON Manuals