Reusing Discharge Headlight Control Module
- If the discharge headlight control module is damaged, replace the module with a new one. Otherwise, it could result in electrical shock or operation malfunction.
- The discharge headlight control module may temporarily operate normally even though it may have been hit, however, the inside of the module could be damaged. If the control module is reused, inspect the following items related to the discharge headlight bulb illumination, and verify that there is no malfunction.
- Perform the tests for the discharge headlight bulb several times under cold lighting condition (switch on after switching discharge headlight bulb off for approx. 10 min or more) and under warm-up lighting condition (switch off for approx. 1 min after switching discharge headlight bulb on for approx. 15 min or more, and switch on), and verify that the discharge headlight bulb illuminates.
- Inspect the discharge headlight bulb illumination until it illuminates evenly after cold lighting, verify that the discharge headlight bulb illumination has no flicker or uneven brightness level.
- Illuminate the headlight for approx. 30 min using a proper discharge headlight bulb, and verify that the illumination condition is stabilized on the left and right with no difference in brightness level.