LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 5 Touring >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Buckle Switch Inspection

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the buckle switch terminals using a tester.
    Fig 1: Buckle Switch Circuit
    G08152560
    • If not as indicated in the table, replace the front buckle.
    Fig 2: Buckle Switch Continuity Chart
    G08152561
scientia non olet · About LEMON Manuals