LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 i Grand Touring >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Driver Side
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver Side

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the buckle switch terminals using a tester.
    Fig 1: Identifying Buckle Switch Connector Terminals (Driver Side)
    G08143871
    • If not as indicated in the table, replace the front buckle.
      Fig 2: Buckle Switch Connector Terminals Continuity Chart (Driver Side)
      G08143872
scientia non olet · About LEMON Manuals