LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Lighting System) >> Front Fog Light Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Fog Light Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Remove the screw and bolt shown in the figure.
    Fig 1: Front Fog Light Screw & Bolt With Torque Specifications
    G06201050Courtesy of MAZDA MOTORS CORP.
  4. Pull the front fog light in the direction of the arrow shown in the figure and remove the pin from the front fog light cover
    5. Fig 2: Removing Front Fog Light
    G06201051Courtesy of MAZDA MOTORS CORP.
  5. Remove the front fog light.
  6. Install in the reverse order of removal.
  7. Adjust the front fog light aiming (See FRONT FOG LIGHT AIMING.)
scientia non olet · About LEMON Manuals