Master Cylinder Removal/Installation: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When removing/installing the master cylinder, avoid touching the primary piston with your hand when not necessary. Otherwise, it could damage the master cylinder.
- Remove the battery and battery tray, (MZI-3.7). See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
- Add brake fluid, bleed the brakes, and inspect for leakage after the installation has been completed. See AIR BLEEDING .