LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Sleeve, Clip Assembly Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sleeve, Clip Assembly Note

  1. Apply ATF to the inner surface of the SST  (49 E032 306).
  2. Slowly insert the sleeve into the SST  while tilting it to each end, and seat the seal ring.
    Fig 1: Applying ATF To Inner Surface Of SST (49 E032 306)
    G08143467
  3. Apply ATF to the inner surface of the sleeve and to the pinion shaft.
  4. Align the pin of the sleeve inner surface with the pinion shaft notch as shown in the figure, and assemble the sleeve to the pinion shaft.
    Fig 2: Aligning Pin Of Sleeve Inner Surface With Pinion Shaft Notch
    G08143468
    CAUTION:
    • When assembling the sleeve, be careful not to deform or damage the seal ring assembled to the pinion shaft. When assembling the sleeve, assemble slowly and do not apply excessive force so as to prevent deformation and damage to the seal ring.
  5. Assemble the clip to the groove of the pinion shaft as shown in the figure.
    Fig 3: Identifying Pinion Shaft And Clip
    G08143469
scientia non olet · About LEMON Manuals