LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Lever component Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever component Removal/Installation

  1. Disconnect the selector lever component connector.
    1. Disconnect the negative battery cable.
    2. Remove the rear console. (See REAR CONSOLE REMOVAL/INSTALLATION .)
    3. Disconnect the selector lever component connector.
      Fig 1: Identifying Selector Lever Component Connector
      G08143329
  2. Remove the selector lever component.
    1. Disconnect the selector cable from the selector lever component.
      Fig 2: Identifying Selector Cable
      G08143330
    2. Remove the selector lever component.
      Fig 3: Selector Lever Component And Nuts With Torque Specification
      G08143331
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals