Lighting System Personalization Features Setting Procedure

LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE

Auto Light Illumination Level

CAUTION:
- Perform the auto light/wiper control module configuration after updating the auto light illumination level to assure that the auto light/wiper system operates correctly.

NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE.

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.When using the IDS (laptop PC)

- Select the "Module Programming"

3. Then, select items from the screen menu in the following order.

- Select "Programmable Parameters"
- Select "Exterior Lighting"

4. Select the item name, and then select option.

5. Select "Low (Other)" or "Standard (Other)" on the M-MDS to set the illumination level.

6. Perform the auto light/wiper control module configuration. Auto Light/Wiper Control Module Configuration

Auto Light System / Auto Light-off System

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.When using the IDS (laptop PC)

- Select the "Module Programming"

3. Then, select items from the screen menu in the following order.

- Select "Programmable Parameters"
- Select "Exterior Lighting"

4. Select the item name, and then select option.





Room Light Control System / Turn Light System

- For the room light control system and turn light system, refer to the control system personalization features setting. Programming and Relearning