LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 5 Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs/Dynamic Stability Control System >> Rear Abs Wheel-Speed Sensor Inspection >> Clearance Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Clearance Inspection

  1. Remove the rear ABS wheel-speed sensor.
  2. Measure the distance between the rear ABS wheel-speed sensor installation surface and the ABS sensor rotor. This is dimension A.
    Fig 1: Measuring Distance Between Rear ABS Wheel-Speed Sensor Installation Surface And ABS Sensor Rotor
    G08150696
  3. Calculate the clearance between the rear ABS wheel-speed sensor and the ABS sensor rotor using the following formula:
    • Clearance (mm {in}) = A -13.9 {0.547}
  4. Verify that the clearance between the ABS sensor rotor and the rear ABS wheel-speed sensor is as indicated below.
    • If there is any malfunction, replace it.

      Clearance 

    • 1.46 mm {0.0575 in} or less
scientia non olet · About LEMON Manuals