A/F Sensor Heater Inspection
WARNING:
- A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
- Disconnect the A/F sensor connector.
- Measure the resistance between A/F sensor terminals A and E.
- If not as specified, replace the A/F sensor. (See AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION ).
A/F sensor heater resistance
1-10 ohms [normal temperature]