October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Auto Reverse Pinch Protection Function Inspection
AUTO REVERSE PINCH PROTECTION FUNCTION DESCRIPTION
| STEP |
INSPECTION |
ACTION |
| 1 |
- Switch the ignition ON (engine off or on).
- Fully open the driver-side power window.
- Set the hammer (thickness: 10 mm {0.39 in} or more)
as shown below. Then, close the power window.
- Verify that the power window opens approx. 200 mm {2.87 in}
after contacting the hammer and the operation stops.
- Does auto reverse pinch protection function operate properly?
|
Yes |
Auto reverse pinch protection function is normal. |
| No |
Go to the next step. |
| 2 |
- Does power window open before contacting the hammer?
|
Yes |
Go to
DRIVER-SIDE DOOR GLASS REVERSE OPENS DURING AUTO-CLOSE (MANUAL-CLOSE) OPERATION (MIS REVERSE OPEN) . |
| No |
Initialize the power window main switch.
NOTE:
- Before initializing the power window main switch, cut off the power supply to the power window main switch for approx. 60 s
. Then, reconnect it again after approx. 60 s:
- Disconnect the negative battery cable.
- Disconnect the power window main switch connector.
- Remove the fuse for the power window system.
|
Courtesy of MAZDA MOTORS CORP.