No. 6 DSC *2 Operates Frequently/DSC Does Not Work Correctly *2: TCS/DSC Indicator Light Turns On And Off While DSC Operates: Notes
NO. 6 DSC 2 OPERATES FREQUENTLY/DSC DOES NOT WORK CORRECTLY 2: TCS/DSC INDICATOR LIGHT TURNS ON AND OFF WHILE DSC OPERATES DYNAMIC STABILITY CONTROL (DSC) POSSIBLE CAUSE DESCRIPTION
| 6 |
DSC *2
operates frequently
DSC does not work correctly
*2
: TCS/DSC indicator light turns on and off while DSC operates |
| POSSIBLE CAUSE |
- DSC HU/CM detected malfunction. (Input and output device malfunction)
- There is a difference in size or air pressure between front or rear tires.
- Poor installation with SAS control module (yaw rate sensor, low-G sensor) (If SAS control module is poorly installed, DSC may operate intermittently.)
- When replacing DSC HU/CM, initialization is not performed, (if initialization is not performed correctly, DSC may not work correctly.)
- Incorrect ABS wheel speed sensor is input to DSC HU/CM.
|