DTC Inspection [Two-Step Deployment Control System]: Notes
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If the self-test is implemented, the seat weight sensor calibration is performed. Perform the DTC inspection in accordance with the following conditions:
- Do not place objects on the front seat (passenger side)
- Do not touch the front seat (passenger side)
- Fix the slide position of the front seat (passenger side) to the maximum rearward position.
- Fix the recliner position of the front seat (passenger side) to the maximum forward position.
- Set cabin vehicle temperature range between the -10 to 40 °C {14 to 104 °F}
- Other than the above conditions, a "Japan only" command is also displayed, however, do not select the command because it is for use in Japan only.