Front Stabilizer, Front Stabilizer Bushing and Front Stabilizer Bracket Installation Note
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Temporarily tighten bolts A and B shown in the figure.
- Tighten bolt A.
Tightening torque
25-29 N.m {2.6-2.9 kgf.m, 19-21 ft.lbf}
- Tighten bolt B.
Tightening torque
25-29 N.m {2.6-2.9 kgf.m, 19-21 ft.lbf}
- Tighten bolt A.
Tightening torque
25-29 N.m {2.6-2.9kgf.m, 19-21 ft.lbf}