October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Intake Manifold Removal Note

Disconnect the MAP sensor/IAT sensor No. 2 connector. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO. 2 REMOVAL/INSTALLATION .)
Disconnect the harness clip from the intake manifold as shown in the figure.

Fig 1: Identifying Harness Clip Installation Position Intake Manifold
Courtesy of MAZDA MOTORS CORP.
Remove the intake manifold.