LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Brake Pipe Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC HU/CM and brake pipe joint referring to the figure.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
    Fig 1: Brake Pipe Nut
    G09783071Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals