July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Part Inspection

Put the TFT sensor into a beaker filled with ATF and gradually warm the ATF.

Fig 1: Putting TFT Sensor Into Beaker Filled With ATF
Courtesy of MAZDA MOTORS CORP.
WARNING:
- Do not touch the ATF and beaker. Otherwise, it could cause severe burns or serious injury from the high temperature.

Measure the resistance between coupler component terminals E and H.

Fig 2: Identifying Coupler Component Connector Terminals

G08152077

Courtesy of MAZDA MOTORS CORP.

If there is any malfunction, replace the coupler component.

TFT SENSOR RESISTANCE

ATF temperature (°C {°F})	Resistance (kilohm)
-20 {-4}	236-324
0 {32}	84.3-110
20 {68}	33.5-42.0
40 {104}	14.7-17.9
60 {140}	7.08-8.17
80 {176}	3.61-4.15
100 {212}	1.96-2.24
120 {248}	1.13-1.28
130 {266}	0.87-0.98