October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Variable Intake Air Control Operation Inspection
- Start the engine.
- Inspect the rod operation under the following condition: Rod operation
| Engine speed |
4, 400 rpm |
| Below |
Above |
| Shutter valve actuator |
Operate |
Not operate |
- If the rod operation is not as specified, inspect as follows:
- Stop the engine.
- Connect the M-MDS to the DLC-2.
- Verify that DTC P0661:00 or P0662:00 is not displayed.
- Inspect the variable intake air solenoid valve. (See VARIABLE INTAKE AIR SOLENOID VALVE INSPECTION
.)
- If the variable intake air solenoid valve is not normal, replace the variable intake air solenoid valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
.)
- If the variable intake air solenoid valve is normal, inspect the following: