DTC P2708:00: Notes

DTC P2708:00	Shift solenoid F stuck on
DETECTION CONDITION	Under the following conditions, intermediate shaft and output shaft rotation ratio is 1.11 or more Gear position is 5GR Accelerator pedal position is 3.87% or more Diagnostic support note The check engine light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM. The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle. PENDING CODE is available. FREEZE FRAME DATA is available. The DTC is stored in the TCM memory.
FAIL-SAFE FUNCTION	Inhibits 5GR Maximizes line pressure Inhibits feedback control
POSSIBLE CAUSE	Deteriorated ATF ATF level low Shift solenoid F stuck off Line pressure malfunction Secondary control valve body malfunction TCM malfunction
SYSTEM WIRING DIAGRAM	-