LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Dynamic Stability Control >> DSC HU/Cm Removal/Installation >> Connector Installation Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Connector Installation Note

  1. Connect the connector and pull the lock lever up in the direction of the arrow.
  2. After connecting the connector, verify that the connector cover is completely pushed in.
    Fig 1: Pulling Lock Lever
    G09783072Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals