Selector Lever Inspection

Turn the ignition switch to the ON position (engine off).
With the brake pedal depressed, verify that there is a "click" at each range when shifted.
Verify that the selector lever can be shifted.
Verify that there is a "click" at each position when shifted from the P position to the M range.

Fig 1: Selector Lever Positions
Courtesy of MAZDA MOTORS CORP.
Verify that the positions of the selector lever and the indicator are aligned.
- If there is any malfunction, adjust the TR switch. (See TRANSMISSION RANGE (TR) SWITCH ADJUSTMENT [SJ6A-EL] .)
Verify that the vehicle operates in each selected range.

Fig 2: Inspecting Interlock Cable Moves Freely
Courtesy of MAZDA MOTORS CORP.