No. 23 A/C Does Not Work Sufficiently: Notes

23	A/C DOES NOT WORK SUFFICIENTLY
DESCRIPTION	A/C compressor magnetic clutch does not engage when A/C switch is turned on.
POSSIBLE CAUSE	PCM, instrument cluster or climate control unit DTC is stored Refrigerant pressure sensor malfunction Improper refrigerant charging amount Seized A/C compressor Evaporator temperature sensor malfunction Open or short circuit in wiring harness between the following terminals: Evaporator temperature sensor terminal B-Climate control unit terminal H (with manual air conditioner) Evaporator temperature sensor terminal A-Climate control unit terminal K (with manual air conditioner) Evaporator temperature sensor terminal B-Climate control unit terminal J (with full-auto air conditioner (single air mix actuator type)) Evaporator temperature sensor terminal A-Climate control unit terminal E (with full-auto air conditioner (single air mix actuator type)) Evaporator temperature sensor terminal B-Climate control unit terminal 1L (with full-auto air conditioner (dual air mix actuator type)) Evaporator temperature sensor terminal A-Climate control unit terminal 1J (with full-auto air conditioner (dual air mix actuator type)) Instrument cluster malfunction (Does not receive A/C request signal from climate control unit or transmit it to PCM) Climate control unit malfunction (A/C switch malfunction or climate control unit does not determine A/C request or transmit A/C request signal) Open circuit in wiring harness between magnetic clutch and body ground A/C relay stuck open Open circuit in wiring harness between the following terminals: Front body control module (FBCM) terminal 1C-A/C relay terminal A Battery positive terminal-A/C relay terminal C A/C relay terminal D-Magnetic clutch terminal A A/C relay terminal E-PCM terminal 2AF