LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 5 GT, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Variable Tumble Shutter Valve Position Sensor Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Variable Tumble Shutter Valve Position Sensor Inspection

NOTE:
  • The variable tumble shutter valve position sensor cannot be removed as a single unit. When replacing the variable tumble shutter valve position sensor, replace it together with the intake manifold as a single unit.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition to ON.
  3. Verify that the variable tumble shutter valve position sensor output voltage (PID: IMRC_POS) within the specification. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
scientia non olet · About LEMON Manuals