October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Driver Side

Disconnect the negative battery cable.
Remove the following parts:
1. Driver-side inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
2. Driver-side front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
3. Driver-side front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
4. Driver-side front power window motor (See POWER WINDOW MOTOR REMOVAL/INSTALLATION .)

Apply battery positive voltage and connect the ground to the driver-side power window motor terminals E and F, and then inspect the driver-side power window motor operation.

G13727976

Courtesy of MAZDA MOTORS CORP.

G13727977

Courtesy of MAZDA MOTORS CORP.

If not as indicated in the table, replace the driver-side power window motor. (See POWER WINDOW MOTOR REMOVAL/INSTALLATION .)

Operation	Terminal
Operation	E	F
Open	B+	Ground
Close	Ground	B+

Connect the battery positive voltage to driver-side power window motor terminal D and connect terminal C to ground.
Operate the driver-side power window motor and measure the voltage at terminals A and B.
- If there is any malfunction, replace the driver-side power window motor. (See POWER WINDOW MOTOR REMOVAL/INSTALLATION .)
Voltage

Pulse: max. 5 V/min. 0 V