October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Auto Reverse Pinch Protection Function Inspection
POWER WINDOW SYSTEM PRELIMINARY - AUTO REVERSE PINCH PROTECTION FUNCTION INSPECTION PROCEDURE
| STEP |
INSPECTION |
ACTION |
| 1 |
- Switch the ignition ON.
- Fully open the driver-side power window.
- Set the hammer (thickness: 10 mm {0. 39 in} or more) as shown below. Then, close the power window.
- Verify that the power window opens 200 mm {7.87 in} after contacting the hammer and the operation stops.
- Does auto reverse pinch protection function operate properly?
|
Yes |
- Auto reverse pinch protection function is normal.
- Perform the two-step down function inspection.
|
| No |
Go to the next step. |
| 2 |
- Does power window open before contacting the hammer?
|
Yes |
- Go to No. 6 DOOR GLASS REVERSES EVEN THOUGH THE GLASS DOES NOT ENCOUNTER A FOREIGN OBJECT WHILE IT IS MOVING UP IN AUTOMATIC MODE.
|
| No |
- Initialize the power window main switch.
NOTE:
- Before initializing the power window main switch, cut off the power supply to the power window main switch for 60 s. Then, reconnect it again after 60 s:
- Disconnect the negative battery cable.
- Disconnect the power window main switch connector.
- Remove the fuse for the power window system.
|
 Courtesy of MAZDA MOTORS CORP.
|