LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 5 GT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Before Service Precaution >> Fuel Line Safety Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Line Safety Procedure

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  3. Remove the fuel-filler cap to release the pressure inside the fuel tank.
  4. Remove the fuel pump relay.
    G13726713Courtesy of MAZDA MOTORS CORP.
  5. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  6. Start the engine.
  7. After the engine stalls, crank the engine 2-3 times.
  8. Switch the ignition to off.
  9. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  10. Install the fuel pump relay.
scientia non olet · About LEMON Manuals