October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Push Button Start Inspection
- Remove the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
- Verify that the continuity between the push button start terminals is as indicated in the table.
Courtesy of MAZDA MOTORS CORP.
- If the continuity can be verified as indicated in the table, go to the next step.
- If not as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
- Apply battery positive voltage and connect the ground to the push button start terminals and verify that the LED illuminates as indicated in the table.
Courtesy of MAZDA MOTORS CORP.