LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 6 Touring, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Motor Inspection >> Front Power Window Motor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Power Window Motor

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5] .)
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the front power window motor connector.
  5. Apply battery positive voltage and connect the ground to front power window motor terminals E and F, and then inspect the front power window motor operation.
    Fig 1: Front Power Window Motor Circuit Diagram
    G10987513Courtesy of MAZDA MOTORS CORP.
    • If the front power window motor does not operate as indicated in the table, replace it.
    Operation Terminal
    E F
    Close B+ Ground
    Open Ground B+
  6. Connect the battery positive voltage to front power window motor terminal D and connect terminal C to ground.
  7. Operate the front power window motor and verify the wave patterns for terminals A and B.
    Fig 2: Front Power Window Motor Voltage Wave Pattern
    G10987514Courtesy of MAZDA MOTORS CORP.
    • Terminal:

      A, B(+) ↔ ground (-)

    • Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range
    • If the malfunction, replace the front power window motor.
scientia non olet · About LEMON Manuals