Power Window SUBSWITCH Inspection

Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Remove the power window subswitch. (Refer to POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
Verify that the continuity is as indicated in the table using a tester.

Fig 1: Power Window Subswitch Terminal Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Power Window Subswitch Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the power window subswitch. (Refer to POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)