Engine Oil Level Inspection
- Position the vehicle on level ground.
- Warm up the engine.
- Stop the engine and allow At Least 5 Min
before continuing.
- Remove the dipstick, wipe it cleanly, and reinstall it fully.
- Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick.
Courtesy of MAZDA MOTORS CORP.
- If the oil level is below or near the L mark, add engine oil. (Refer to ENGINE OIL REPLACEMENT .)
- If the oil level is above the F mark, penetration of fuel into the engine oil can be considered. Replace the engine oil. (Refer to ENGINE OIL REPLACEMENT .)
- Insert the oil level gauge completely until it attaches to the cylinder head cover.