July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Selection of Procedure for Immobilizer System-Related Parts Programming

Verify that the ROOM fuse, AT fuse, and SRS2/ESCL fuse are installed.

Select the applicable programming procedure from the service content of the immobilizer system-related parts.

PROGRAMMING PROCEDURE TYPES FOR IMMOBILIZER SYSTEM-RELATED PARTS

No.

Service

Programming procedure

1

When programming additional remote transmitter⁽¹⁾

(Refer to NO. 1 ADDITIONAL REMOTE TRANSMITTER PROGRAMMING PROCEDURE (USING THE M-MDS) .)

2

When PCM is replaced

(Refer to NO. 2 PROGRAMMING PROCEDURE AFTER PCM REPLACEMENT .)

3

When start stop unit is replaced
When PCM and start stop unit are replaced simultaneously

(Refer to NO. 3 PROGRAMMING PROCEDURE WHEN START STOP UNIT IS REPLACED OR WHEN START STOP UNIT AND PCM ARE REPLACED SIMULTANEOUSLY .)

4

When remote transmitter is replaced
When remote transmitter is lost

(Refer to NO. 4 PROCEDURE FOR REMOTE TRANSMITTER CLEARING AND NEWLY PROGRAMMING .)

⁽¹⁾	Have a remote transmitter that can start the engine.