Auto Close Operation Not Performed: Notes

Description

Auto close operation is not performed with the ignition switched ON (engine off or on).

Possible Causes

Liftgate opener switch malfunction
Liftgate latch and lock actuator malfunction
Power liftgate (PLG) front switch malfunction
Power liftgate (PLG) rear switch malfunction
Remote transmitter malfunction
Power liftgate (PLG) drive unit malfunction
Power liftgate (PLG) control module malfunction
Open circuit in wiring harness between the following terminals:
- Power liftgate (PLG) control module terminal 1Z and liftgate opener switch terminal C
- Power liftgate (PLG) control module terminal 1AC and power liftgate (PLG) rear switch terminal D
- Power liftgate (PLG) control module terminal 1AC and power liftgate (PLG) front switch terminal J
- Power liftgate (PLG) control module terminal 1Y and power liftgate (PLG) front switch terminal I
Short to ground in wiring harness between the following terminals:
- Power liftgate (PLG) control module terminal 1Z and liftgate opener switch terminal C
- Power liftgate (PLG) control module terminal 1AC and power liftgate (PLG) rear switch terminal D
- Power liftgate (PLG) control module terminal 1AC and power liftgate (PLG) front switch terminal J
- Power liftgate (PLG) control module terminal 1Y and power liftgate (PLG) front switch terminal I